HEAT PUMP · LOWER RUNNING COSTS
Rheem 280e heat pump hot water system
$8,567.50
INCL. GST · FULLY INSTALLED
$7,450 excl. GST. A travel charge applies outside Christchurch metro.
Backed by Butterfield Bathrooms, Christchurch's hot water experts.
We'll send your quote and book an installer site visit. A 50% deposit is invoiced after the visit, and the balance on completion.
New Rheem AmbiPower 280e heat pump system
Site assessment before install day to plan the install spot and pipe route
Initial water test
Removal and disposal of the old cylinder
Seismic restraint
New electrical circuit with code of compliance
Commissioning to code
One service inspection at 12 months, with a corrosion check and free anode replacement if needed, and a reminder at 5 years when the next service is due
Our default heat pump. 280 litres. Qualifies for all major bank green loans.
Smaller or larger household? See the Rheem AmbiPower MDc-180 and Rinnai HydraHeat 340L below.
Why choose a heat pump
Lower running costs
Up to 73.9% less energy to heat your water (Rheem’s figure for the AmbiPower 280e). For most Christchurch homes that's around $1,000 in power savings every year.
12-month service inspection
One service inspection at 12 months, with a corrosion check and free anode replacement if needed, and a reminder at 5 years when the next service is due. Plus the manufacturer's warranty.
Green loans available
Westpac 0% for 5 years for Westpac home loan customers (conditions apply). Other major banks offer green loans too. Check with your bank. Most homeowners pay for the upgrade in monthly savings.
Spread the cost with a green loan
Heat pump hot water systems qualify for all major New Zealand bank green loan schemes. Most homeowners can spread the upfront cost across 3 to 5 years at very low or zero interest.
WESTPAC
0% interest
for 5 years for Westpac home loan customers (conditions apply)
OTHER MAJOR BANKS
Green loans
Check with your bank for current rates and conditions.
Other system options
Need a smaller or larger heat pump, or a simpler replacement at a lower upfront cost? Here are the alternatives, all fully installed.
HEAT PUMP - OTHER SIZES
Rheem MDc-180
Best for smaller households
$7,990
incl. GST fully installed
A travel charge applies outside Christchurch metro.
180 litres, for smaller households.
Heat pump package included
Site assessment before install day to plan the spot and pipe route
Initial water test
Removal and disposal of the old cylinder
Seismic restraint
New electrical circuit with code of compliance
Commissioning to code
One service inspection at 12 months, with a corrosion check and free anode replacement if needed, and a reminder at 5 years when the next service is due
Rinnai 340L
Best for larger households
$11,781
incl. GST fully installed
A travel charge applies outside Christchurch metro.
340 litres, up to 7 people, 89 L/h recovery, heat pump mode down to -10°C. Our largest system.
Heat pump package included
Site assessment before install day to plan the spot and pipe route
Initial water test
Removal and disposal of the old cylinder
Seismic restraint
New electrical circuit with code of compliance
Commissioning to code
One service inspection at 12 months, with a corrosion check and free anode replacement if needed, and a reminder at 5 years when the next service is due
Dux 300L
Best for 3 - 5 people
$4,750
incl. GST fully installed
Add $750 if we're moving your system from inside to outside. A travel charge applies outside Christchurch metro.
Mains pressure package included
Installer site assessment before install day to confirm the setup
Removal and disposal of the old cylinder
Supply and install with seismic restraint and a tempering valve to current code
Connection to existing water, power and drainage
Commissioning
10-year warranty on the tank
Dux 250L
Best for 2 - 3 people
$4,420
incl. GST fully installed
Add $750 if we're moving your system from inside to outside. A travel charge applies outside Christchurch metro.
Mains pressure package included
Installer site assessment before install day to confirm the setup
Removal and disposal of the old cylinder
Supply and install with seismic restraint and a tempering valve to current code
Connection to existing water, power and drainage
Commissioning
10-year warranty on the tank
Dux 180L
Best for 1 - 2 people
$4,075
incl. GST fully installed
Add $750 if we're moving your system from inside to outside. A travel charge applies outside Christchurch metro.
Mains pressure package included
Installer site assessment before install day to confirm the setup
Removal and disposal of the old cylinder
Supply and install with seismic restraint and a tempering valve to current code
Connection to existing water, power and drainage
Commissioning
10-year warranty on the tank
FAST RECOVERY - LARGER HOUSEHOLDS
Dux 315L Twin
Best for 5+ people / heavy use
$5,550
incl. GST fully installed
Add $750 if we're moving your system from inside to outside. A travel charge applies outside Christchurch metro.
Mains pressure package included
Installer site assessment before install day to confirm the setup
Removal and disposal of the old cylinder
Supply and install with seismic restraint and a tempering valve to current code
Connection to existing water, power and drainage
Commissioning
10-year warranty on the tank
What a standard install includes
Every price on this page covers a complete standard installation.
Heat pump package
Site assessment before install day to plan the spot and pipe route
Initial water test
Removal and disposal of the old cylinder
Seismic restraint
New electrical circuit with code of compliance
Commissioning to code
One service inspection at 12 months, with a corrosion check and free anode replacement if needed, and a reminder at 5 years when the next service is due
Mains pressure package
Installer site assessment before install day to confirm the setup
Removal and disposal of the old cylinder
Supply and install with seismic restraint and a tempering valve to current code
Connection to existing water, power and drainage
Commissioning
10-year warranty on the tank
What could change the price
For standard installs, the price shown is the price we aim to honour. The small number of jobs that fall outside a standard install usually involve:
Long pipe runs or restricted access
Switchboard upgrade or non-standard electrical work
Asbestos or remedial work in the cylinder area
Pre-existing plumbing issues that need addressing
Moving a mains pressure cylinder from inside to outside adds $750. Heat pumps are installed outside as standard, with no move charge. A travel charge applies outside Christchurch metro.
How it works
From here to a confirmed install in four steps
01
Choose your system
Pick from the options above or use the assessment if you're not sure.
02
Quote and site assessment
We'll send your quote and book an installer site visit to confirm everything.
03
Deposit after the visit
A 50% deposit is invoiced after the site visit. Nothing to pay before then.
04
Installation
We complete your replacement or upgrade. The balance is invoiced on completion.
Ready to get started?
Choose your system and we'll send your quote, book an installer site visit and handle the rest.